.28 7.0 .244 6.20 2x .287 .003 7.29 .08 .18 .02 4.6 .5 .018 .46 .52 13.2 a 1 2 .490 12.45 e a .311 7.90 .42 10.7 @ .436 = (d) 11.07 z equal spaces .269 6.83 .055 1.40 @ .327 = (c) 8.29 y equal spaces g .112 2.84 b .210 5.33 .311 7.90 .52 13.2 (y)x (.109 [2.77]) = d .109 2.77 (y)x (.109[2.77]) = c .0545 1.384 .056 1.42 .112 2.84 2x .136 3.45 plated thru holes b 9x .040 .003 3 1.02 .08 plated thru hole recommended pc board requirements (component side of board shown) .004[0.1] z .004[0.1] z z detail a scale 2 : 1 catalog p/n: 1891109s7k5554 notes: unless otherwise specified 1 catalog number, date code and manufacturing location code located approximately as shown on surface indicated. 2 socket cover & shield staked together and shipped as separate assembly unattached to connector. drawing shows connector fully assembled for reference only. 3 this dimension is final plated thru hole size. 4. material & finish c-press contacts: copper alloy finish: c-section: 30 microinches gold over 50 microinches nickel press fit end: pure tin insulator: polyester, glass filled rated ul 94v-0. color: black socket cover: polyester, glass filled rated ul 94v-0. color: black shield: steel finish: pure tin ground strap: phosphor bronze finish: pure tin 5. preformance characteristics insulation resistance: 5,000 megohms minimum operating temperature range: -55 c to +105 c current rating: 1 amp at 70 c 3 amp at 20 c c-press contact: maximum insertion force (per contact): 40 lbs. / 178 n maximum minimum retention force (per contact): 10 lbs. / 44 n minimum r r 37 189-1137S-7-K5554 2.738/69.55 2.500/63.50 1.853/47.07 1.962/49.83 2.159/54.84 2.729/69.32 17 18 25 189-1125s-7-k5554 2.09/53.09 1.852/47.04 1.199/30.45 1.308/33.22 1.511/38.38 2.088/53.04 11 12 15 189-1115s-7-k5554 1.550/39.37 1.312/33.32 .654/16.61 .763/19.38 .971/24.66 1.541/39.14 6 7 9 189-1109s-7-k5554 .122/31.04 .984/24.99 .327/8.31 .436/11.07 .643/16.33 1.213/30.81 3 4 no. of positions catalog no. a b c d e g .015 y z a rev a 27432 w inches ? er e lec ? ronics winchester electronics corporation 62 barnes industrial road north wallingford, connecticut 06492 wpm dw 07/24/08 by date appd released per ewr08-er9408 description a rev 07/24/08 vbh date approved xx/xx/xx xxx date approved 07/24/08 wpm date approved 07/24/08 dw date drawn customer drawing per asme y14.5m-1994 unless otherwise specified: dimensions are in inches [mm] tolerances: decimal: .xx [x.x] .01 [0.3] .xxx [x.xx] .005 [0.13] .xxxx [x.xxx] .xxxx angles: 2 scale: 1:1 1 sht of 1 d-sub shielded socket connector with c-press socket contacts (rohs with exemption)
|